Najeeb Electronics

IN STOCK

TP-Link EAP772-Outdoor BE11000 WiFi 7 Outdoor Access Point

₨ 51,500

TP-Link EAP772-Outdoor is a tri-band Wi-Fi 7 access point delivering combined speeds up to 10.77 Gbps across 2.4 GHz, 5 GHz, and 6 GHz.

  • Supports AFC (Automated Frequency Coordination), unlocking full-range 6 GHz performance for true tri-band outdoor coverage.
  • Features Multi-Link Operation (MLO), 4K-QAM, and 320 MHz channels for Wi-Fi 7 speed and low latency.
  • Delivers approximately 300 m² (3,200 ft²) of omnidirectional outdoor coverage, ideal for hotels, farms, and business parks.
  • Built with an IP68-rated weatherproof enclosure and a 2.5G PoE+ port for rugged, high-bandwidth deployment.
  • Manages seamlessly through TP-Link’s Omada SDN platform, with mesh, seamless roaming, and cloud-based control.
SKU EAP772-Outdoor Categories , Tags , , , , Brands:
Shipping, Return & Pickup

Yes, we ship nationwide via courier.

Yes, we ship nationwide via courier.

Description

TP-Link’s outdoor Wi-Fi lineup takes a major leap forward with the TP-Link EAP772-Outdoor, its first outdoor access point built entirely around Wi-Fi 7 technology and true 6 GHz outdoor coverage.

At the heart of this access point is a tri-band, six-stream design that reaches combined speeds of up to 10.77 Gbps in the US (BE11000) and around 9.3 Gbps in Europe (BE9300). Coverage spans 2.4 GHz, 5 GHz, and 6 GHz simultaneously, giving networks far more usable spectrum than previous-generation dual-band outdoor units.

What makes the TP-Link EAP772-Outdoor stand out is its support for AFC — Automated Frequency Coordination. Since the 6 GHz band typically has limited outdoor range due to regulatory power restrictions, AFC allows this access point to broadcast at higher power on 6 GHz, giving it reach comparable to the 5 GHz band. That’s a meaningful upgrade for outdoor deployments that want true tri-band performance rather than 6 GHz functioning as a short-range bonus.

Wi-Fi 7 features go beyond raw speed. The access point supports Multi-Link Operation (MLO), letting devices use multiple bands at once for lower latency and better reliability, along with 4K-QAM modulation and 320 MHz channel bandwidth on the 6 GHz band for maximum throughput in demanding environments.

Coverage-wise, the TP-Link EAP772-Outdoor delivers a recommended omnidirectional footprint of roughly 300 m² (3,200 ft²), making it well suited for hotels, business parks, farms, yards, and other outdoor commercial spaces that need consistent signal in every direction rather than a focused beam.

Build quality matches the performance ambitions. TP-Link EAP772-Outdoor carries an IP68 rating, TP-Link’s highest protection tier, shielding it from dust and water submersion in harsh outdoor conditions. Power and data run through a single 2.5G PoE+ port, supporting higher-bandwidth backhaul than older PoE+ Gigabit designs.

Deployment stays straightforward through Omada SDN integration. Administrators get automatic device identification, one-click adoption, centralized cloud management, mesh networking, and seamless roaming — all accessible via the Omada app or web controller, alongside TP-Link’s broader ecosystem of switches and gateways.

For organizations planning ahead for Wi-Fi 7 adoption outdoors, the TP-Link EAP772-Outdoor offers a rare combination: tri-band speed, genuine 6 GHz outdoor range through AFC, rugged IP68 durability, and centralized SDN management — positioning it as one of the most capable outdoor access points TP-Link currently offers.

TP-Link EAP772-Outdoor HARDWARE FEATURES

Interface 1× 2.5G Ethernet (RJ-45) Port (Support 802.3at PoE)
Button Reset
Power Supply • 802.3at PoE
Max. Power Consumption 23W (for PoE)
Dimensions ( W x D x H ) 9.1× 8.2 × 2.8 in (230 × 207.5 × 69.7 mm)
Antenna • 2.4 GHz: 2× 4 dBi
• 5 GHz: 2× 6 dBi
• 6 GHz: 2× 6 dBi
GNSS L1 (1575.42 MHz) receiver, supporting GPS, Galileo, GLONASS, and BeiDou signals
Receive sensitivity: -164dBm (tracking)
GPS antennas: Integrated 3dBi omnidirectional antennas
Bluetooth BLE 5.2
Weatherproof Enclosure IP68
Mounting Pole/Wall Mounting (Kits included)

TP-Link EAP772-Outdoor WIRELESS FEATURES

Coverage 300m2 (3,200ft2) Recommended Omnidirectional Coverage
Concurrent Clients 380+**
Wireless Standards IEEE 802.11be/ax/ac/n/g/b/a
Frequency 2.4 GHz, 5 GHz, 6 GHz
Signal Rate 688 Mbps (2.4 GHz) + 4324 Mbps (5 GHz) + 5765 Mbps (6 GHz)†
Wireless Functions • 4k-QAM
• OFDMA
• Multiple SSIDs: 24 (8 for each band)
• Enable/Disable Wireless Radio
• Automatic Channel Assignment
• Transmit Power Control (Adjust Transmit Power on dBm)
• QoS (WMM)
• MU-MIMO
• MLO
• 320MHz
• Omada Mesh§
• Seamless Roaming(802.11k/v/r)§
• Band Steering
• Load Balance
• Airtime Fairness
• Beamforming
• Rate Limit
• Reboot Schedule
• Wireless Schedule
• Wireless Statistics based on SSID/AP/Client
• Static IP/Dynamic lP
Wireless Security • Captive Portal Authentication§
• Access Control
• Wireless Mac Address Filtering
• Wireless Isolation Between Clients
• SSID to VLAN Mapping
• Rogue AP Detection
• 802.1X Support
• WPA-Personal/Enterprise, WPA2-Personal/Enterprise, WPA3-Personal/Enterprise, OWE
Transmission Power • CE:
Indoor Mode: < 20 dBm (2.4 GHz, EIRP);, < 23 dBm (5 GHz, band 1 & band 2, ElRP), < 28 dBm (5 GHz, band 3, EIRP); <23dBm (6 GHz, EIRP)
Outdoor Mode: < 20 dBm (2.4 GHz, EIRP); < 28 dBm (5 GHz, band 3, EIRP)
• FCC:
Indoor Mode: < 25 dBm (2.4 GHz); < 25 dBm (5 GHz); < 25 dBm (6 GHz)
Outdoor Mode:< 25 dBm (2.4 GHz); < 25 dBm (5 GHz); < 25 dBm (6 GHz)

TP-Link EAP772-Outdoor Management Features

Omada App Yes
Centralized Management Yes, through
• Omada Cloud-Based Controller
• Omada Hardware Controller (OC300)
• Omada Hardware Controller (OC200)
• Omada Software Controller
Cloud Access Yes, through
• Omada Cloud-Based Controller
• Omada Hardware Controller (OC300)
• Omada Hardware Controller (OC200)
• Omada Software Controller
Email Alerts Yes
Management MAC Access Control Yes
SNMP v1, v2c
System Logging Local/Remote Syslog Yes
SSH Yes
Web-based Management Yes
L3 Management Yes
Multi-site Management Yes
Management VLAN Yes
Zero-Touch Provisioning Yes. Requiring the use of Omada Cloud-Based Controller

OTHERS

Certification CE, FCC, RoHS
Package Content • Access Point EAP772-Outdoor
• Waterproof Kit
• Mounting Kits
• Installation Guide
System Requirements Microsoft Windows XP, Vista, Windows 7, Windows 8, Windows10, Windows11, Linux
Environment • Operating Temperature: -30–70 ℃ (-22–158 ℉)
• Storage Temperature: -40–70 ℃ (-40–158 ℉)
• Operating Humidity: 10–90% RH non-condensing
• Storage Humidity: 5–90% RH non-condensing

Reviews

There are no reviews yet.

Be the first to review “TP-Link EAP772-Outdoor BE11000 WiFi 7 Outdoor Access Point”

Your email address will not be published. Required fields are marked *

Recommended Products